《混凝土结构设计道理》测试题(国外英文资料).docVIP

《混凝土结构设计原理》测试题(国外英文资料) Principle of design of reinforced concrete structure Multiple choice questions: 1. In the beam of oblique section shear bearing capacity calculation, on the section size of beam must be bounded (too small), its purpose is to prevent [c]. (a) the slope breaks; (b) shear damage; (c) oblique damage; (d) bend the cross section. In the main form of the cross section destruction of the bending component, [c]. (a) the slant destroys the shears and destroys the bb1. (b) shearing pressure breaks the slings to destroy the . (c) skew the shears to destroy . (d) shear pressure damage the slant to destroy . In the main form that is damaged by the oblique section, [D]. (a) the slant destroys the shears and destroys the bb1. (b) shearing pressure breaks the slings to destroy the . (c) skew the shears to destroy . (d) shear pressure damage the slant to destroy . The continuous beam is used in the calculation of shear bearing capacity when it is mainly concentrated load. (a) the calculation of shear ratios; (b) generalized shear span; (c) the larger value of the cross ratio and the generalized shear span; (d) the smaller value of the cross ratio and the generalized shear span. The most effective method for preventing oblique pressure damage is: [D]. (a) increase the hoop; (b) increase the bending muscles; (c) increase the abdominal muscles; (d) increase section size. True or false: In the reinforcement of reinforced concrete beams, the shear force is only in the reinforcement of the steel bar, and the other reinforcement is not subject to shear force. [x] Tip: bending the bar can also withstand shear forces 2. The main form for inclined section flexural member damage: suspension and baroclinic destruction for brittle failure, shear destruction to the plastic damage, so the bearing capacity calculation formula for inclined section flexural member is established according to the stress of the shear damage characteristics. [x] Tip: shear damage is also b