《混凝土结构设计道理》功课2(国外英文资料).docVIP

《混凝土结构设计原理》作业2(国外英文资料) Surname: School no. : A: The teachers signature: Principles of concrete structure design Assignment 2 Explanation: this assignment consists of chapters 6 through 8, which are completed by 8 weeks. A, multiple choice In the calculation of the load-bearing capacity of the rectangular section under the force of the shear, the longitudinal tendon is determined by (D) A. bending b. cutting C. shear, torque d. moment The reason for the improvement of the screw column in the column is (C). The presence of A helical tendon increases the overall reinforcement rate C. the helical string constrains the transverse deformation of the concrete. The axial compression component (D) is the configuration of the longitudinal tendon. The effect of the hoop is to prevent the buckling of the longitudinal and the tensile strength of the concrete C. prevent destabilizing damage D. help the concrete to withstand pressure and reduce the section size of the component 4. concrete structure design code regulation, with a spiral or welded ring type indirect the bearing capacity of steel columns cannot be higher than with ordinary tied column bearing capacity (C). 30% B. 40%. C. 50% d. 60% (D) when the boundary of the compression component is damaged. The bending of the steel bar to the side of the axial force is higher than that of the crushed concrete The bending of the bar to the side of the shaft is more than that of the crushed concrete C. Avoid the steel bar on one side of the axial force and yield to the other side of the bar D. far away from the axial force, the steel bar submits to the crushed concrete In the short column of the concrete shaft of the reinforced concrete in the short term, the limit load is reached (D). A. All levels of steel can exert their compressive strength The stress at all levels can reach 0.002 Es C. the higher the strength of the concrete, the higher the reinforcement stress D. It has nothing to do with concrete, and the reinforcement stre