一级建筑师机电实务口诀(国外英文资料).docVIP

一级建造师机电实务口诀(国外英文资料) The first class builder is the practice of mechanical and electrical practice The container class includes: measuring tank, top slot, receiving tank, trough, buffer tank, steady pressure tank, dryer, etc. P11 Tips: slow to steady the high ground. Industrial furnaces include: metallurgical furnaces, non-ferrous furnaces, chemical furnaces, building materials furnaces, and other industrial furnaces. P11 The legend: he has wild flowers. Metal storage tanks include: vault, floating roof tank, spherical tank, mobile pressure vessel etc. P11 The legend: zhu (store) my aunts ball. The main functions of static equipment are storage, pressure, exchange, reaction, filtration, etc. P12 Tip: sit still and stir the rice pot or cook the pot 25, factory, workshop, station) foundation construction measurement with a focus on the steel column base, steel column base is the feature of deep foundation pit, and the foundation for the following cushion layer and embedment anchor bolt, etc. Its construction measures and procedures are as follows: The center line of the transit center is used to make the center line of the transit center. Four points are measured at four corners of the fixed frame, so as to be used to make the concrete surface of flat mat. Carry out a fixed frame and draw flat. Foot bolt installation and elevation measurement; Measure the standing and pouring concrete. P13 Tips: the steel column is the bottom of the note, the home is overpaid. The measurement method of the plane control network is: triangulation method, wire measuring method, three-sided measuring method, etc. P16 Tips: flat corner The method of elevation measurement is: leveling, electromagnetic wave range triangulation. P16 The legend: make up hydropower According to the number of door number of the pulley group, the method of dressing is usually done in the same way: wear, wear and double run. Generally 3 doors and below, suitable for use; 4 ~ 6 suitable for the use of flowers; For