剪切刚度、剪弯刚度(国外英文资料).docVIP

剪切刚度、剪弯刚度(国外英文资料) Shear stiffness, shear stiffness, seismic shear force and the ratio stiffness of the horizontal displacement ratio. In the first layer, the shear stiffness is used to calculate the lateral stiffness ratio. When the transition layer is 2-layer, the lateral stiffness ratio is calculated by using shear stiffness. The lateral stiffness ratio of the transition layer is calculated by using shear stiffness when the transformation layer is above 3 and 3 floors. ? At the same time, the lateral stiffness should not be less than 60 percent of the lateral stiffness of the upper floor Shear stiffness (6.1.14) when the basement is used for nesting site. The rest of the structure shall be used in accordance with the specification. 6 earthquake shear force and displacement stiffness ratio between the layers are used to calculate the stiffness ratio between floor, shall not be used for other stiffness calculation, such as the basement, the basement backfill soil stiffness lost 0. The second chapter? The calculation and selection of shear, shear, seismic force and seismic layer displacement ratio of three kinds of stiffness ratio The understanding and application of seismic forces and the displacement ratio between seismic layers (1) specification requirements: the seismic code article first 3.4.2 and the rule 3.4.3 and high gauge clause 4.4.2 all regulation: the floor is the lateral stiffness of the lateral stiffness should not be less than the upper adjacent floors or its adjacent three layers of lateral stiffness on average 70% 80%. The formula 2: Ki = Vi/Δ UI The range of applications: The engineering rigidity ratio of 3.4.2 and 3.4.3 and the section 4.4.2 of the high gauge shall be used to perform the calculation. It can be used to determine whether the basement roof can be embedded in the upper structure. (2) the understanding and application of shear rigidity Specification requirements: (1) the high gauge first e. according to article 0.1, the bottom of the