[完美解决]windows7打开或关闭Windows功能后空白的问题.docxVIP

Steps that might help fix Windows Update errors and a blank Windows Features dialog in Windows Vista Over the holidays, I was asked by a friend to look at a problem they were running into on their Windows Vista system.? They were unable to connect to Windows Update and check for updates and received a cryptic error message.? After a few minutes of poking around on the system, I recognized a common set of symptoms that I had also seen on a couple of co-workers systems a few weeks prior to that.? I also recognized some symptoms that Ive heard about from customers via my blog who had trouble getting the .NET Framework 3.5 to install on Windows Vista due to issues with the .NET Framework 2.0 SP1 and/or .NET Framework 3.0 SP1 OS update packages that it tries to install behind the scenes. Since I had a system available to debug on, I ran through some troubleshooting steps that Ive learned over the past couple of years related to Windows Vista OS update installation issues and identified several specific symptoms, and then eventually came up with a set of steps to fix this system.? Then I came back to work after the holidays and tried out the steps on my co-workers systems and found that the same basic set of symptoms and resolution steps worked there as well.? As a result, Im going to try to summarize these symptoms and the steps I used to resolve them in the hope that they might be helpful to others suffering from the same issues on their systems. Symptoms of this problem In the systems Ive been able to find so far with this type of problem, Ive observed a common set of symptoms. Symptom 1: Blank Windows Features dialog Going to the?Programs and Features?control panel and then clicking the link on the left labeled?Turn Windows features on or off?brings up the Windows Features dialog.? This can also be launched directly by running OptionalFeatures.exe.? In the error cases Ive seen, the Windows Features dialog appears completely empty instead of listing all of the Windows