GSM基本呼叫处理流程.ppt

GSM Basic Call Process Performance Analysis Land to Mobile Call Follow LM Call Description LM Call A interface Message Sequence LM Call OM Description Mobile to Land Call follow ML Call Description ML Call A interface Message Sequence ML Call OM Description LL Call OM Description Intra-MSC Handover Description Inter-MSC Handover Description Handover Originating on A interface Message Sequence Handover Terminated on A interface Message Sequence Location Update Procedure Location Update Description PPS Subscriber Call PSTN Subscriber Network Solution - * MSC VLR GMSC HLR BSC PSTN 4 1 5 3 2 10 9 8 7 20 6 18 16 19 13 12 11 14 15 17 20 18 Signal link Trunk link 1. PSTN originates call to GMSC with IAI ( called number MSISDN). 2. GMSC sends SRI message (Send Routing Information) to HLR, HLR verifies whether the call is allowed. 3. HLR sends PRN message(Provide Roaming Number) to VLR according to VLR location. 4. VLR verifies MS status, assign MSRN and send back to HLR in the message PRN ACK. 5. HLR sends MSRN back to GMSC in the message SRI ACK. 6. GMSC routes the call the MSC/VLR with IAI ( called number MSRN) 7. MSC get TMSI/IMSI, LAC sends Paging request to BSS. 8. MS receives Paging message and send Paging Response back. 9. MSC sends AUTHENTICATE REQUEST to MS. 10. MS sends AUTHENTICATE RESPONSE to VLR. 11. MSC sends CIPHER MOD CMD to MS. 12. MS sends CIPHER MOD COM to MSC. 13. MSC sends Set Up to MS. 14. MS sends Call Confirm to MSC. 15. MSC sends Assignment Request to BSC. 16. BSC sends Assignment Complete to MSC. 17. Handset ringring, MS sends Alerting message to MSC. 18. MSC sends ACM message to GMSC, PSTN. 19. Handset answer the call, MS sends Connect message to MSC. 20. MSC send to ANC message to GMSC, PSTN. Message sequence: 10:49.315 MSU nSCCP 3410h 35EAh 2 CR BSSAP 35EAh BSSAP Complete Layer 3 Information CELL ID 460 00 37268 18481 Paging response TMSI