电梯运行的特性 C++(国外英文资料).docVIP

电梯运行的特性 C++ The ladder is preferred outside the ladder to run the least possible way to respond to the passengers request Consider the features of several elevator operations: Status: static waiting, ascending, descending, 2. In the process of upward instruction points four kind of situations: the current position with instructions of up and down two, under the current position of the up and down. In the descending process, the four conditions of the upward description of the same three. TDD 4. Has the received multiple instructions, set the priority method (can also be nearby principle, can also be the same priority, can also according to the right of way to calculate the priority: the same power of 0.7 or greater, distance weight difference level/current away from the target direction finally layer level, issue instructions waiting longer priority. According to the results of these for the entire quantity multiplication judgement to the next level. When youre stationary, you receive multiple user directives, prioritizing the method (you can get close to the first, or the first selection algorithm of the same four) 6. According to a weekly cycle, record every day the number of each level according to the ascending and descending, statistics of each layer of activated degree and the top and bottom lines of possible degree, choose to accept instructions after can be used as priority algorithm According to the data obtained from 6, you can determine which layer of the elevator should stop at rest to optimize the time for each layer of command response. 8. Your program add can set the preferred method of function changed. You can adjust the algorithm according to the change of situation, to expect the best priority selection algorithm. The simulation runs very easily. However, when the number of elevators is greater than one, if the algorithm is not good, it will emerge: 1, elevator cluster 2, the elevator running empty Waiting too long In particular: The elevator is i