纯滚动隔震系统位移计算方法的对比分析.pdfVIP

学兔兔 第34卷第5期 土 木 建 筑 与环 境 工程 Journal of Civil．Architectural Environmental Engineering VoL 34 No．5 2012年 10月 0ct．2O12 doi：10．3969／j．issn．1674—4764．2012．05．018 纯滚动隔震系统位移计算方法的对比分析 魏 标 ，戴公连 ，于向东 ，曾庆元 ，王军文 (1．中南大学 土木工程学院，长沙 410075；2．石家庄铁道大学 土木工程学院，石家庄 050043) 摘 要：针对纯滚动隔震系统，根据其地震位移反应规律，编制了数值分析程序；采用实验方法和理 论分析方法，对比分析了数值分析程序和传统的刚塑性力一位移曲线方法。结果表明，数值分析程 序比较合理，计算结果比较精确，且偏于保守；传统的刚塑性力一位移曲线方法不合理，计算结果偏 小；地震作用下，结构的最大相对位移可能超越地面的最大绝对位移。 关键词：结构；隔震；滚动摩擦；地震位移；计算方法 中图分类号：U442．55 文献标志码：A 文章编号：1674—4764(2012)05—0ll6一O5 Comparison Analysis of Calculation Methods of Seismic Displacement for the Isolation System Based on Pure Rolling WEI Biao ，DAI Gonglian ，YU Xiangdong ，ZENG Qingyuan ，WANG Jonwen (1．School of Civil Engineering，Central South University，Changsha 410075，P．R．China； 2．School of Civil Engineering，Shijiazhuang Tiedao University，Shijiazhuang 050043，P．R．China) Abstract：With the isolation system based on pure rolling as the obj ect of study，the computer program was develeped to calculate its seismic displacement based on its characteristics．And then，experiment method and theory analysis method were adopted to analyze the new computer program and the traditional calculation method’S rationality in contrast．It is shown that the computer program is reasonable，and its results are relatively accurate and conservative．The traditional calculation method based on the rigid—plastic relation of force and displacement is illogical，and its results are relatively smal1．When subj ected to earthquakes，the structure’S maximum relative displacement would be larger than the earth’S max