UPFC三节点功率注入模型及其工程应用_王海潜.pdfVIP

44 18 Vol.44 No.18 2016 9 16 Power System Protection and Control Sep. 16, 2016 DOI: 10.7667/PSPC151728 UPFC UPFC UPFC UPFC UPFC UPFC (PSASP)(UD)UPFC UPFC UPFC UPFC UPFC UPFC UPFC PSASP/UD A three-bus power injection model of UPFC and its engineering application 1 1 1 1 2 2 WANG Haiqian , QI Wanchun , QIAO Liwei , WU Chen , CHEN Xi , WU Xi (1. Jiangsu Electric Power Company Economic Research Institute, Nanjing 210096, China; 2. School of Electrical Engineering, Southeast University, Nanjing 210096, China) Abstract: In particular practical engineering application, the parallel side transformers of UPFC are integrated to the low voltage buses. Due to the special structure of UPFC, it is difficult to analyze the impact of UPFC on low voltage buses, neighboring substations and transmission lines with existing model. A three-bus power injection model of UPFC is proposed in this paper in order to solve this problem. Based on power injection method, the mathematical expression of a three-bus power injection model of UPFC is derived. A three-bus power injection simulation model is established by using the User Defined (UD) function of Power System Analysis Software Package (PSASP). In this model, the UPFC parallel power injects into the low voltage buses, which overcomes the limitation of existing model since they cannot reflect the impacts of UPFC on low voltage buses, connected substations and transmission lines. This three-bus power injection model has been put into practice successfully in the simulation o