生化样本前处理系统中样本容器自动开盖装置设计.pdf

中国医学装备2017年2月第14卷第2期 China Medical Equipment 2017 February Vol.14 No.2 学术论著 生化样本前处理系统中 样本容器自动开盖装置设计* ① ② ③ 白晓亮 崔 石 姜大伟 [文章编号] 1672-8270(2017)02-0001-04 [中图分类号] R197.39 [文献标识码] A [摘要] 目的：设计一款能够去除橡胶盖及螺旋盖的生化样本前处理系统自动开盖装置，可兼容 不同规格的样本容器与容器盖，解决现有样本容器开盖设备适应性差、结构复杂及可靠性低等问 题。方法：由夹持机构、开盖机构、提升机构、旋转机构和废盖回收机构5部分构成自动开盖装 置，样本容器盖的加紧及旋转采用同一个动力元件。结果：新型自动开盖装置适用于CS-6400等 系列全自动生化分析仪，可有效提高生化样本的检测效率，减少交叉污染，降低了样本容器制造 成本和维护费用，增大了系统的可靠性。结论：所设计的自动开盖装置，可解决目前样品容器开 盖装置存在适应性差和可靠性低等技术问题，满足临床检验实用化的需要。 [关键词] 样本容器；开盖装置；生化分析仪 DOI: 10.3969/J.ISSN.1672-8270.2017.02.001 Design of automatic cap opening device for specimen container in the specimen pretreatment system of biochemistry analyzer/BAI Xiao-liang, CUI Shi, JIANG Da- 作者简介 wei//China Medical Equipment,2017,14(2):1-4. 白晓亮,男,(1981- ), [Abstract] Objective: To design a new automatic cap opening device consists of holding 硕士，高级工程师。长 mechanism, open mechanism, improve mechanism, rotating mechanism and recycling 春迪瑞医疗科技股份有 mechanism in order to resolve the poor adaptability, complex structure and lower liability problem for specimen container in the biological specimen pretreatment system. Methods: This 限公司，从事全自动生 paper designed a automatic equipment to remove the rubber cap and screw cap. This equipment 化分析仪研发工作。 is compatible with the different specification specimen containers and the container cap, and the specimen container cap was stepped up and rotated with same power component. Results: The application of equipment has reduced the manufacturing cost and maintenance cost for specimen container, improved the system reliability, solved the current technical problems of the equipment, such as poor adaptability and lower liability. Conclusion: The design of equipment mainly adapts to CS-6400 series of automatic b