基于ROMAXCLOUD的主轴轴承优化设计及试验研究.pdfVIP

基于ROMAXCLOUD 的主轴轴承优化设计及试验研究 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 尹延经 ，牛青波 ，王东峰 ，徐润润 ，杨浩亮 （1.洛阳轴研科技股份有限公司，河南 洛阳 471039；2.河南省高性能轴承技术重点实验室，河南 洛阳471039 ；3.滚动 轴承产业技术创新战略联盟，河南 洛阳 471039 ） 摘要：以某型号机床主轴轴承7014C/P4 轴承为研究对象，以RomaxCLOUD 软件为平台，搭建了轴 轴承系统模型。 建立了以内、外圈沟曲率半径系数、球径和球数为优化因素，旋滚比、刚度、 劳寿命、最小油膜厚度和套圈次表层最 大剪切应力作为目标函数的优化数学模型，优化设计结果为：内圈沟曲率半径系数是0.54，外圈沟曲率半径系数是0.525， 钢球直径是12.7mm ，钢球个数为19。对优化设计的7014C/P4 轴承进行了强化寿命试验，试验结果表明，研制的7014C/P4 主轴轴承振动、温升平稳，未出现 劳剥落。 关键词：RomaxCLOUD；主轴轴承；优化设计；寿命试验 中图分类号: TH 133.3 文献标志码：B 文章编号： Optimization Design and Experimental Study on Spindle Bearing Based on RomaxCLOUD Yin Yanjing1,2,3, Niu Qingbo1,2,3, Wang Dongfeng1,2,3,Xu Runrun1,2,3,Yang Haoliang1,2,3, ( 1.Luoyang Bearing Science Technology Co．，Ltd ．，Luoyang 471039，China ；2. Henan Key Laboratory of HighPerformance Bearing Technology, Luoyang 471039 ，China ；3. Strategic Alliance for Technology Innovation in Rolling Bearing Industry， Luoyang 471039 ，China) Abstract: 7014C/P4 bearing was the one machine tool spindle bearing, it was researched in this article. The shaft bearings model was built based on RomaxCLOUD. Groove curvature radius coefficients of the inner ring and outer ring, ball diameter and the number of ball were as optimizing factors, the ratio of revolution and rolling of balls, stiffness, fatigue life, minimum oil film thickness and the maximum shear stress in subsurface of rings were as obj ective functions, which built the optimization mathematical model. Groove curvature radius coefficients of the inner ring was 0.54, Groove curvature radius coefficients of the outer ring was 0.525, the ball diameter was 12.7mm and the number of ball was nineteen, which were the outcome of optimization design. The 7014C/P4 bearing by optimization