制粒技术(国外英文资料).docVIP

制粒技术(国外英文资料) Depends on the requirements of the product (tablets, capsules, dissolution, etc.), time, energy consumption and the existing equipment, etc. In addition, good wet granule machine is no longer need to swing granulating. There is also a method that actually has done the high speed shearing grain + fluidized bed, please discuss the operation procedure and the corresponding effect, thank you! Let me say something about my humble opinion: 1 high speed shearing grain + fluidized bed that I did. How do you say? Not all varieties and processes are suitable for this method. As far as I am concerned, it is suitable for the larger and more viscous varieties. If the soft material and the grain hardness is not enough blindly to use this method, after the drying up a lot of fine powder, everybody also mentioned. This leads to the cracking of the tablet. The spray grain is called a one-step grain, which I also did. To some extent it has solved the problem of the production of many varieties of Chinese medicine. There are several advantages: one, the grain of the system is more uniform loose, the colour and lustre is even, the film is the difference is stable, the one-sided is better. Two, can replace the method that already USES vacuum dry or spray dry treatment clear paste, direct spray makes the grain. The operating environment is more closed and the pollution is small But it also has the following disadvantages: one, the production period is longer, the energy consumption is big. Second, the production period is longer, the material consumption is large, because of the long time close the high temperature work, the shake belt the broken frequency is faster, the material running material phenomenon is serious. Three, the spray process a little carelessly can lead to the problem of the bed, the drop paste, the lump. 3 high speed grain mechanism soft material + swing grain + fluidized bed drying: this kind I also did, this is easier. Because the soft material of the h