二手摩托辨别大全(国外英文资料).docVIP

二手摩托鉴别大全(国外英文资料) The identification of second-hand motorcycle Quality identification (1) engine. The engines good or bad is the key to determine the quality of the motorcycle. When choosing, be careful to observe that the position of the engine should be on the same axis as the frame. Then hang up the gap and step on the starting lever. If the noise is not heard, the engine cylinder is of good quality. Take the canal, connect the power supply, turn on the tank switch and fire. Checking the engines starting and hanging gear is the key to choosing a motorcycle. Happy taobao, I love taobao, A good engine can start from two to three times on the starting gear, and not extinguish the fire in idle situation, no noise, at the same time, the acceleration is very sensitive. Then the wall check is changed from low speed to high gear, which requires a smooth running. There was no crash in the gear shift, and there was no air leakage in the exhaust pipe. Finally, the smoke from the muffler is observed, and the light green color is the best. Love taobao 23 The body shape of the car. The layout is reasonable, new and beautiful, the paint is smooth and bright. Love taobao 23 Steering the, fuel tank, seat cushion, rack, frame and other parts of structure design, has the best new idea, the length-width ratio of car body to appropriate, damping cylinder before and after both parallel and symmetric with front and rear tyres, at the same time to check all kinds of accessories, spare parts, see if it is complete. 23 The quality of the electroplating parts not only affects the appearance of the body, but also can protect the motorcycle to reduce the rust corrosion. The paint surface requires symmetry, light, and no touching. The electroplating layer should be bright, no defect, and the chrome layer will not roll up when stroked. The article was taken from a love of () - a detailed link: /espc/esmtcdjb_564.html U u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u u