超长结构处理办法(国外英文资料).docVIP

超长结构处理措施(国外英文资料) Talk about the deformation of the roof of the superlong building 【 abstract 】 : the super-long structures is not set expansion joints crack problem can be generated by the design, construction, maintenance, etc. To take certain measures and solved. Key words: super long buildings; Fracture; Controlling the current demand for the function and environment of the house is higher and higher, the single small building plane is satisfied Abstract: the problem of cracks in the expansion joints of superlong buildings can be solved by means of design, construction and maintenance. Key words: super long buildings; Fracture; control The people on the function of the building and environment of the demand is higher and higher, the single short architectural plane already cant satisfy peoples needs, at present the structure of the form is varied, plane size is becoming more and more big. For some super long buildings with special requirements, there is a contradiction in the length limit of the expansion joints in the existing concrete specifications. These buildings will be affected by the appearance of buildings, the effect of waterproof, and the arrangement of equipment if the buildings are set up in accordance with the regulations. However, if not setting expansion joint, as a result of the concrete tensile capacity is low, poor toughness, easy to contract, thus will produce shrinkage crack caused by concrete shrinkage and temperature crack caused by temperature. These cracks, which cause leakage, are bad for the buildings waterproofing and affect the normal use and safety of buildings. So for the super-long buildings floor roof how to solve the setting expansion joint, neither dont make the rules and regulations of the concrete floor roof generate more than allow the problem of crack width, has aroused the concern of the general engineering design personnel. Specification, if there is sufficient basis and reliable measures, expansion joint maximum distance