压缩式封隔器射孔段坐封的有限元分析.pdfVIP

石油机械 CHINA PETROLEUM MACHINERY - 83 一 2015 年第43 卷第9 期 ‘;IB 气田开发工程 压缩式封隔器射孔段坐封的有限元分析* 刘旭辉1 李万斌l 冯定1 张公社2 刘建2 张红l ( 1.长江大学机械工程学院 2. 长江大学石油工程学院) 摘要: 在经过射孔工艺改造后的注水井中，常规封隔器胶筒坐封射孔的受力状况比较复杂。 通过对压缩式封隔器胶筒进行工况下的受力分析与有限元建模，对压缩式封隔器光滑套管段坐封 与射孔段套管坐封进行有限元计算和分析，得出了 2 种坐封情况下封隔器胶筒以及肢筒与套管之 间的应力分布规律。 通过对比分析，发现压缩式封隔器在射孔段坐封时，封隔器坐封效果有所下 降，但不影响使用，可以在射孔段实现封堵。 胶筒与毛刺接触后， 胶筒等效应力并未急速增大， 同时并未对肢筒造成破坏。研究内容为评估封隔器的使用效果提供了一种新的方法。 关键词: 压缩式封隔器; 射孔段; 坐封; 有限元分析 中图分类号: TE931 文献标识码: A doi: 10. 16082/j. cnki. issn. 1001-4578.2015.09.019 Finite Element Analysis of Compression Packer Setting in Peñorating Interval Liu Xuhui l Li Wanbin l Feng Dingl Zhang Gongshe2 Liu Jian2 Zhang Hong l ( 1. School 01 Mechanical ET飞gineering ， YaT啄.tze University; 2. Petroleum Engineering College 01 Yangtze University) Abstract : In a water injection well treated with perforating technology , the stress condition of conventional compression packer rubber sleeve used in perforating interval is relatively complex. In this paper , stress analysis and finite element modeling are cor.ducted for compression packer rubber sleeve under working conditions , and then finite element calculation and analysis are made on the setting of smooth casing interval and the setting of per- forating interval of compression packer. Stress distribution in compression packer rubber sleeve and between rubber sleeve and casing is identified under above two setting conditions. Through comp缸ative analysis , it is found that 由e compression packer rubber sleeve setting in perforating interval does not affect the using of packe