钻杆常用英文以及翻译.doc

油钻具的外单专用语翻译小结 Stabilizer；稳定器string integral blade stabilizer钻柱型整体螺旋稳定器string integral blade stabilizer 钻柱型可换套稳定器near bit sleeve stabilizer 井底型可换套稳定器? ?mandrel 芯棒??width宽度hole size 井眼尺寸angle角度??size of collar O.D.-I.D 钻铤的尺寸内外径CONN UP DOWN 接头上下端Pin and box should be protected by phosphate surface coating公母扣表层应磷化Thread roots should be cold rolled equipped with cast steel thread protector 螺根应钢化Box with lifting balt母扣端加工提升短节welded 焊接的?tube I.D OD 管体内外径??taper upset抬肩倒角??centre upset 中部加厚 tool joint 接头 Hardbanding 耐磨带wear pads of 1on both pin and box end (Amco 300XT)applied prod 在公母螺纹两端各敷焊3圈安科300XT的耐磨带Bore back on box 在母螺纹端加工插孔Stress relief groove on pin 在公螺纹端加工应力分散槽Internal plastic coating :TK34L 内涂 Thread protector: pressed steel 冲压钢制护丝帽O.E.M(originalequipment.manufacturer)初始设备制造厂家Certificate of origin 原产地证明Warranty certificate 保单证明All subs must be completed with steel thread protector.所有接头必须有护丝帽Commissioning conditions_调试条件Documentations 必备资料References 备注Pup joint 短钻杆REG –regular 扣型Elevator recess 吊卡槽Bevel 倒角Sealing face 密封面Deformation 变形Down-hole 井下管柱Tolerance 耐受力Flank 侧面? ?full faceCorresponding 一致的，对等的Derived 由…..而来Arbitrarily 任意的Reference Dimension参考尺度.HWDP 加重钻杆Ex-work price 出厂含税价RMB/Joint 元/根 AbbreviationDP Drill pipe 钻杆HWDP heavy weight drill pipe 加重钻杆DC drill collar 钻铤STB stabilizer 钻杆扶正器SMDC short magnetic drill collar 短无磁钻铤PDM positive displacement motor 螺杆NMDC nonmagnetic drill collar 无磁钻铤（钻具）BOP blowout preventer 封井器CSC casing 套管JNT joint 单根XO cross-over 配合接头IF internal flush 内平FH full hole 贯眼REG regular 正规IU internal upset 内加厚EU external upset 外加厚IEU internal external upset 内外加厚OH open hole 裸眼WOB weight on bit 钻压RPM revolutions per minute 转速分钟SPM strokes per minute 冲程每分钟ECD equivalent circulating density 当量泥浆密度MT metric ton 公制吨BHA bottom hole assembly 底部钻具组合DST drill stem test 钻具测试KS key seat 键槽STDS stands 立柱VIS viscosity 粘度WL water loss 失水PV plastic viscosity 塑性粘度 YP yield point 屈服值FL fi