下落橡胶压缩变形(国外英文资料).docVIP

降低橡胶压缩变形(国外英文资料) Netizens question How to control the compression of vulcanized rubber. Questioner: opgdghhpxz scan number: 146 question time: 2010-08-02 01:59 Name: ? Pen name: opgdghhpxz Rating: Soldier (1st class) Answer number: zero Passing rate: 0% The main industries: Business opportunities Company: The answer Collect the answers to your friends The latest answer: damaicha2011 Rating: Soldier (1st class) Other contributors to the answer: damaicha... How to control the vulcanizates of compression set Determinants of compression set a lot of, also is very complex, not only depends on the raw rubber, but also depends on the formulation and process, etc. Therefore, we should carefully analyze and study the internal factors to find out the solution. ? First of all, it depends on the variety of the raw gum, which is the main raw material for rubber products, and if there is no glue, it will be a no-rice picnic. The variety of raw glue is different in structure and different in structure. ? Classification of raw glue, crystallization and non-crystallization; There are polarity and non-polar; Saturated and unsaturated; They have self-reinforcing and non-self-reinforcing; There are thermoplastic and non-thermoplastic and so on, in a word, the structure is different, the composition is different, the genes are different, the performance is different. Here is the order of the size of the compressed permanent deformation of various raw gums: ? In general, the flexible, high-intensity, self-reinforcing raw gel is easy to recover, and the compression of permanent deformation is smaller. In the structure, the side chains, the branched chain and the gene are more, the internal resistance is large, the deformation is not easy to recover, the residual partial deformation is more permanent deformation is larger. Such as BR, NR, CR, FKM compression permanent deformation is small, and the TR SBR, IIR, compression permanent deformation is large, because of the SBR hysteresis los