汞离子的检测(国外英文资料).docVIP

汞离子的检测(国外英文资料) Detection of mercury ions in water environment Preface: mercury is the only a liquid at room temperature and liquid metal, mainly used for scientific instruments, mercury, mercury boiler pump and mercury vapor lamp, also widely used in medicine, for a long time, mercury products can be found everywhere in the life of people. Enrichment of mercury in the environment can passive plant, through biological transformation into a more organic mercury toxicity, various forms of mercury by water and the food chain enter human body, have toxic effects on the body, long time exposed to high mercury in the environment, can cause brain damage and death. Therefore, trace amounts of mercury in the environment are extremely important. The current methods for detecting trace mercury are mainly atomic absorption, atomic fluorescence, ultraviolet spectrophotometry and so on. Keywords: Hg2 + test fluorescence spectrophotometry monochroma Dithiazone monochromate, which is normally used in the wang water decomposition experiment, with EDTA, sodium citrate as a concealment, and 2 to 5 with dithiazone - benzene extraction of mercury. Disulfide hydrazone mercury yellow complex compound with excess disulfide hydrazone extraction to the benzene layer at the same time, with iron, calcium, copper, lead, zinc, thallium, bismuth, cadmium, nickel, cobalt, manganese, gold, silver, platinum and palladium separation etc. Then the organic phase was then applied to the organic phase, and the excess of dithiazone in the organic phase was washed by the alkaline lotion, and the color was made using the orange yellow of thiazone in the benzene layer. Experimental methods: disulfide hydrazone reservior fluid 0.1% said 0.1 grams of disulfide hydrazone, put in a beaker, add 50 ml, benzene dissolved into the separatory funnel, 30 ~ 40 ml, and 10% ammonium hydroxide solution of saturated sodium sulfite solution 2 ml, EDTA, sodium citrate mixed solution 3 ml, extraction for 1 minute. After the s