吊车梁吊装方案(国外英文资料).docVIP

吊车梁吊装方案(国外英文资料) 1. The project summary This scheme is a project for the construction of the crane girder of the steam engine room crane, which is a project of 60 thousand tons/year coal methanol project. There are 20 parts of the crane beam, 4 models, 1 shaft to 2 axis, 10 shaft to 11 axis ydl9-1b, and the length 9000mm. Axis 2 to 6, 8 to 10 axis, ydl9-1s root is 12, length 9000mm; The 6 axis to the 7 axis, YDL9-1Z root is 2, and the length is 9500mm. 7 axis to 8 axis YDL9-1Z root is 2, length 8450mm. The beam height of crane is 1650mm, the width is 400mm, the top 700mm, the concrete design strength grade is C40. The concrete installation crane has a high table high of 14.69 m. The parameters are as follows: The serial number Member number The number unit Single - For note one YDL9-1 b L = 9000 mm 4 t 16.524 2 YDL9-1 s L = 9000 mm 12 t 16.524 3 Z YDL9-1 L = 9500 mm 2 t 17.442 4 Z YDL9-1 L = 8450 mm 2 t 15.514 2. The compilation basis BREC0702-407-0213-x by the Inner Mongolia boyuan engineering co., LTD. Construction and acceptance of concrete structures GB50204-2002; The quality assurance manual and program file of the zhonghua second construction group co., LTD. Heavy equipment lifting manual - the second edition; Prepare before the sling The crane girder is pre-fabricated and the concrete strength meets the lifting conditions. The necessary machinery and construction materials are in place according to the plan. The required personnel are fully in place as planned and have been certified by safety education. The plan for the lifting of the installation shall be approved, and the safety and technology shall be completed in accordance with the plan. 3.4 electricity, roads and communications have been improved and unimpeded. Special operators will be trained and qualified for the certificate. Inspect the hoisting equipment in full and meet safety requirements. Around 3.7 remove hoisting working range, the upper and sundry, obstacles, and various kinds of metal materi