圈梁钢筋计算(国外英文资料).docVIP

圈梁钢筋计算(国外英文资料) You can look at the 03G363 atlas in detail, with the structure of the node in it. Manual calculation of the formula of reinforcement The first chapter beam The first frame girder First, the first cross-bar calculation 1, the top of the string The upper part of the length = the length = the length = the length of the top of the bar and the anchor value of the anchor The end of the line End support length: the first row is the log / 3 + end support anchor; The second row is the log / 4 + end support anchor 3, lower steel The lower bar length = net span length + left anchor value Note: the bottom reinforcement is the same regardless of the row or not, so we can not enter the information in the lower longitudinal of the beam. The above three kinds of reinforcement are involved in the anchorage problem, so how does the software implement the determination of the anchorage in 03g101-1? Now lets summarize the problem of the anchorage of these three types of reinforcement: The support width is greater than or equal to the width of the branch and is greater than 0.5 Hc + 5d, which is the anchor, the Max {Lae, 0.5 Hc + 5d}. The anchorage value of the steel bar is equal to less than or less than 0.5 Hc + 5d, which is a curved anchor, Max {Lae, support width - protection layer + 15d}. The anchor value of steel bars = Max {Lae, 0.5 Hc + 5d} 4, the waist muscle Structural reinforcement: structural reinforcement length = net span length + 2 x 15d Anti-twist bar: the algorithm is the same as the steel bar 5, brace Stretch length = (beam width - 2) + 2 x 11.9 d (earthquake bending hook) + 2d Brace root number: if we dont have the flat method given in the input of the brace spacing, so brace root number = (number of stirrup / 2) * (number of structure reinforcement / 2); If the width of the rib bar is given, the length of the string is equal to the length of the bar. 6, stirrup The length of the band is equal to (the beam width -2 times the protection layer + the girde