基坑回填土方案(国外英文资料).docVIP

基坑回填土方案(国外英文资料) Phase ii of the science and technology building in suzhou new area The base pit soil party Back to the Fill in the shi work party case Editor: wei yi The project department of the second phase of the science and technology building in suzhou new area November 2001 catalogue First, compile basis 3 Second, the project overview 3 Third, construction arrangement 3 4, construction method and construction process flow 5 Safety measures 6 Sixth, the construction guarantee measures 7 7, fire protection measures 7 The construction plan for the backfilling of the basement pit in the basement of the science and technology building in suzhou new area First, the basis of preparation The construction and construction drawings of the second phase of the science and technology building in suzhou new area The design of the second phase of suzhou new area science and technology building Quality acceptance and acceptance of building foundation (GB50202-2002) Uniform standards for quality acceptance of construction projects (gb50300-2001) Regulations on construction of construction engineering in jiangsu province Second, the general situation of the project This project is located in suzhou high-tech zone, JingRun road north of science popularization of science and technology city road east, is composed of two monomer structure, including the 1 # floor underground, fifteen floors on the ground, as the frame shear wall structure; 2 # building below ground level, six floors above ground, for frame structure. The total floor area is about 55,000 square meters, of which the basement is about 16,000 square meters, the foundation pit is about 840m. This engineering structure design use fixed number of year for 50 years, the security level for the secondary, the structure importance coefficient is 1.0, the structure seismic fortification intensity is 6 degrees, the seismic fortification intensity is 6 degrees, frame - shear wall frame aseismic grade level 2; The seismic wall l