无梁楼盖的特点与结构设计综述(国外英文资料).docVIP

无梁楼盖的特点与结构设计综述(国外英文资料) The characteristics of the structure and its analysis and design method are summarized jaco (wuhan university of technology, civil engineering and architecture college, wuhan 430070) Abstract: this paper introduces the characteristics of the structure of the structure without beams, and several common design methods, and summarizes the advantages and disadvantages of several methods. Keywords: no girders cover; Empirical method Such as generation framework method The Characteristics of The Sab - column System And the Design Method of Review Zhang bo (School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070) Abstract: This paper introduces the characteristics and some methods in common use of slab - column system, and introduce the advantages and disadvantages of these methods. Keywords: Slab - column System; Traditional Experimental Coefficient Method; The Equivalent Frame Method. 1 introduction The structural system of no girder floor is that the beams are not set in the column, and the floor is supported directly by the double force building system of the column. Also called the plate structure system. Due to the advantages of good integrity and large building space, the structure of the building is widely used in shopping malls. The characteristics of no girder structure 2.1 structure No beams and columns are connected directly, and the floor load can be carried directly from the board to the column and under the pillar, reducing the transmission channel. Often in order to improve the ability of the top of the cylinder to resist the shock and to reduce the plate span, the column cap is usually placed on the top of the cylinder. But if the load is not high enough, it can also be uncapped. The column cap is shown in figure 1. A) used for light load b) for heavy load FIG. 1: a column cap form without a frame The height of the building is smaller than the floor of the rib, which can effectively increase the spa