材料送检计划表1(国外英文资料).docVIP

材料送检计划表1(国外英文资料) Manual: This plan shall be prepared according to the relevant provisions of the construction department and the relevant provisions of the construction project and the inspection system and the actual situation of the project. This plan is prepared by the on-site supervision and the sample personnel of the construction unit. 3, this plan as a witness sampling plan to guide the engineering work, but the actual sample size can be adjusted on the basis of the condition of the construction, reinforced sampling can be adjusted according to come in batches, concrete block can be adjusted by the amount of construction occurs. The plan does not include the demolition test block made by the construction unit. According to the actual situation adjustment, the sampling is normal to witness the sampling range. The inspection of the thickness of the steel bar shall be determined by the consultation of party a, the supervision and the construction unit before the inspection of the concrete parts. DB64/266-2010 Table B2-10 Witness sampling plan Project name: Basic form Raft foundation Structure form Frame shear wall The layer number 19/2 - The serial number Material, test piece, test piece name Material specification, type approach batch The next part The contractors Delivery plan (group) Supervision unit witness sampling plan (group) one cement P.O 42.5 6 The main body 4 2 2 Fly ash admixture Class II Base, the main body one 3 sand Medium sand 3 The main body 2 one 4 Gravel and pebble 5 Main wall brick 6 Main wall block 7 steel HPB235 18 Base, the main body 12 6 HRB335 17 Base, the main body 11 6 HRB400 30 Base, the main body 21 9 Steel strand 4 The main body 4 2 8 Bar joint Mechanical connection 168 Base, the main body 124 64 9 Concrete test block of bearing structure 91 Base, the main body 51 40 10 Block of the masonry mortar for the heavy wall 11 The structural concrete USES admixtures LD pumping agent - P1 Base, the main body one LD - EA1 expansive agent Base