构件预制及吊装施工方案(国外英文资料).docVIP

构件预制及吊装施工方案(国外英文资料) Dan precision casting company structures precast precision casting workshop and hoisting construction plan Construction plan of building block and crane Single industrial factory building structures, mainly refers to a pillar, crane beam, beam and roof beam (thin abdomen beam and prestressed roof truss, etc.), roof panel, roof gutter board, such as prefabricated prefabricated, this structure in the domestic chemical industry, metallurgy and so on have been widely used. Single industrial building prefabricated structures, including component of prefabrication and lifting two construction procedures, using prefabricated structures construction to speed up the construction progress, improve the quality of engineering, reduce the project cost. One, the characteristics of this process: (1) it is prepared by casting and casting and casting, reducing the use of materials such as templates and steel scaffolding. (2) collect the hoisting and increase the mechanical utilization rate. (3) the relative concentration of the production shall be conducive to the control and guarantee of the quality of the project. (4) the construction speed of the project shall be accelerated and the construction period shall be shortened at the same time as the foundation. (5) reduce the time of high-altitude work and reduce the adverse factors in the production of safety. (6) increase the level of factory, precast and mechanized construction. Second, the process principle Single-layer workshop production process of the construction of prefabricated structures, according to the feasibility of reinforced concrete members are most, USES the existing reinforced concrete construction and acceptance standard, according to the design of all kinds of prefabricated geometry size, reinforcement and concrete label requirements for shuttering, binding reinforcement, pouring concrete, curing concrete, etc., and then release, with various types of crane hoisting tools translation in place,