结构设计说明word(国外英文资料).docVIP

结构设计说明word(国外英文资料) 1 project summary Engineering name:. Engineering location:. The 1.3 details of the project are shown in table 1.3: Table 1.3 is the working procedure The serial number The name of the project Number of floors (upper layer/subsurface number) Building function The structural system Seismic grade Basic form one 6/0 (no jumping layer) Office building Frame structure The secondary Under the bar 2 2/1 (no jumping layer) The dining hall complex is a gymnasium Frame structure The secondary Independent foundation and water resistant board The buildings should be used in accordance with the functions specified in the architectural drawings, without technical identification or design approval, and the purpose of the structure and the use of the environment shall not be altered. Architectural design parameters Table 2.1 architectural design parameters (1) the safety level of the structure The secondary (2) the life of the design 50 years (3) anti-earthquake protection categories A class (4) grade of foundation design Class c (5) basic wind pressure 0.45 kN/m2 (6) the eigenvalue of the natural foundation bearing capacity 105 kpa (7) to design the basic earthquake acceleration 0.15 g (8) ground roughness B (9) the type of building sites Ⅲ class (10) anti-seismic intensity 7 degrees (11) the site eigenperiod value 0.45 (s) (12) design earthquake groups The first group (13) basic snow pressure 0.40 kN/m2 (14) the standard freeze depth 0.70 m Engineering geology and groundwater Report name: geotechnical survey report; Number: Unit of organization: Date of preparation: 2011.11. 3.2 formation Based on the buried depth of the building, the main holding layer is the second layer, the powder earth, the foundation bearing capacity is 105KPa, 3.2.1 hydrogeological conditions: Ground water burial situation: the highest water level in recent years is under the consideration of 3.0 m. 3.2.2 corrosive evaluation: The ground soil of the engineering site is slightly corrosive