房建试题(国外英文资料).docVIP

房建试题(国外英文资料) The building project safety quality basic management test (A) (A) Unit: name: position: The topic purpose A, single topic selection Second, the true or false Three, the paper topic As a performance Standard score 40 20 40 Get points One, single choice: (20 questions, 2 points per question) The main vertical bar spacing should not be greater than () when the frame column of steel pipe is used. A. 0.5 m B 2, USES the fastener type steel pipe scaffold templates scaffolding, standing pole must be set at the bottom of the vertical and horizontal sweep the floor, under the vertical and in horizontal, using right-angle fastener, fastened up the limit height of the vertical sweeping bar from base for (A) A. 200mm b. 250mm c. 300mm The butt of the vertical bar (the great cross bar) should meet the following rules: (A) A. should be staggered, two adjacent rod joint, at the levels of sync or across different release stagger distance should be not less than 500 mm, the joint center nearest the master node distance not greater than 1/3 of the longitudinal spacing B. The joint of two adjacent poles should be in the same step and the same span C. the joint of two adjacent poles can be in the same vertical plane The joint of two adjacent poles can be within 200mm in the horizontal direction When the scaffold is segmented, and when the separation is dismantled, the scaffold shall be (A). A: it is necessary to set up the wall and horizontal brace on both ends B. no reinforcement You dont have to have a wall D. set up unloading measures The temporary electric power and the lighting distribution shall be set up. The distance between the distribution box and the switch box shall not exceed (A); The level of the switch box should not exceed the level of the power equipment controlled by (A) m. A. 30. B. 20 m, 3 m; C. 15 m, 10 m; When the power distribution or distribution line is out of power, the grounding line should be suspended and the power failure sign should be suspen