《主动变速器》-温习题谜底(朱明zhubob)(国外英文资料).docVIP

《自动变速器》-复习题答案(朱明zhubob)(国外英文资料) The automatic transmission problem One, fill-in-the-blanks: In a transmission device, the device that transmits and controls energy in liquid medium is called a device. The single row of planetary gear is made up of, and consists of. The electronic control system changes the gears according to the information sent back. Automatic transmission of oil pressure test includes:, and. 5. Simpson planet gear mechanism adopts two planetary gear, sharing, and connection as power output device. The pilot project includes,, etc. The torque converter has three components: and. 8. There are three basic automatic transmission control oil pressure:,,. Common brakes have two kinds of brakes. 10, by common pump, and three forms. The inspection of automatic transmission fluid is divided into two parts: and inspection. The speed of the automatic transmission should not exceed a second. 13. When locking clutch not locking, engine power passed to automatic transmission, automatic transmission oil, input shaft. At the end of the lock lock, the engine is powered by a torque converter and a turbine to the automatic transmission shaft. During clutch separation, the clutch piston and clutch or clutch disc and the ring between the ring are called. The reason for the low speed of failure is that. The function of the speed control valve is. 17. The idler pulley is equipped with one-way clutch hydraulic torque converter, when the car moving resistance large turbine speed... pump impeller rotational speed, flow from the turbine wheel in the direction of oil and pump impeller rotation direction..., idler pulley for oil flow effect, achieve _____ role, overcome resistance; When the car moving resistance hours, the turbine speed and wheel speed pump _______, at that moment, from the turbine oil flowing into the wheel direction and __________ the pump impeller rotation direction, idler pulley ____________ hold in order to reduce resistance. The single row of planetary