栈桥施工技巧交底(国外英文资料).docVIP

栈桥施工技术交底(国外英文资料) Attached table 29: technical background book (1311) Technical clarificaiton book Table number 1311 The project name TieSiJu group co., LTD. In the salt Ⅲ marking a division for the first frame First page co Clarificaiton number LY Ⅲ - Ⅰ - QLJD - 1 The name of the project The right line of salt is the cross of the rose river and the huai river bridge Design document number The construction site Construction of adjacent line, block of block Date of disclosure The 2014-07-19 Technical background: The foundation is applicable to the construction of the left line of the cross rose river. Design situation: A steel trestle bridge is built on the construction platform of the girder bridge. Pier 6 m wide, base the phi 529 (delta) = 8 mm steel pipe pile, steel pipe pile cross arm adopts double I40a i-steel, upper with single not reinforced bailey beam (group 3) structure form. The beam of I20a is set on the beret beam. The beam is covered with decorative pattern plate with 10mm thick. The steel pipe pile of pier bridge is adopted [20 channel steel connection to enhance the overall stability of the bridge pier structure. The conditions and preparations for starting construction: The material approach to the entrance and acceptance, the mechanical approach acceptance and acceptance, the personnel training is qualified, the certificate is on duty. Construction techniques: Pier by chase to the middle of the river on both sides of the Taiwan across the construction, steel pipe pile with 100 t crawler crane was DZ90 hydraulic vibration hammer sinking, and then in 100 t crawler crane beam installation, bailey and pier construction, such as panel laid the crawler crane, after the completion of complete pier construction step. The main procedure of the piers and the process flow chart of the construction process are as follows: The construction process of the piers is set up Process flow chart of piers bridge Production of steel pipe pile (1) steel pipe pile adopts p