综采任务面装备回撤平安质量标准化标准(国外英文资料).docVIP

综采工作面设备回撤安全质量标准化标准(国外英文资料) The standard of safety standards for safety quality of the fully mechanized working face is removed In order to strengthen the safety quality management of the retracement of the fully mechanized working face equipment, ensure the quality of the recovery equipment and the quality of the retracement of the equipment, and eliminate the injuries of minor injuries; Eliminating one or two non-fatal accidents; The elimination of electrical failure; Special standard. Quality technology management Prior to the withdrawal, the examination and acceptance by the mining organizations shall be subject to acceptance and acceptance of the documents. The survey record of the equipment condition of the fully mechanized work area and the route of supporting transportation. 3, regulation measures (1) the procedures of the procedures are improved, the narration is clear, the chart is complete and complete, and the site is highly operational. (2) the approval and implementation of the examination and approval shall be carried out in a timely manner, and the major technical leaders of the competent departments for examination and approval shall participate in the examination and approval, and study the implementation of the time, the number and the detailed records. (3) special measures, such as special measures, maintenance of roadway, and the treatment of death racks, shall be completed in the event of changes in field conditions. Second, working face coal wall and roof management 1, the hydraulic support (pillar) of the working side shall be numbered and managed, and the number is clear. The hydraulic system has no leakage, fluid, the component is not defective, the line is not compressed; The brackets are tight and no automatic sinking. Remove the management of the way support (1) from bridge USES the anchor net support, withdraw after completion of construction, bridge road, channel at the top to have no obvious sinking, there is no back, replace phenomen