04配置OPC 通讯.ppt

Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. 4 – 在FactoryTalk View SE 应用中配置OPC 通讯 Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Objectives Configure communications using an RSLinx OPC data server by performing the following tasks: Add a communications driver Create an OPC topic Locate HMI project files Test communications After completing this lesson, you should be able to: Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Key Terms Driver OPC (Object Linking and Embedding for Process Control) Topic Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Understanding RSLinx Software RSLinx software serves OPC data to the Rockwell Automation line of programmable controllers. Unlike RSLinx Enterprise software, it provides a download path for the various RSLogix software packages to the matching controller. Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Understanding RSLinx Software The information being served to FactoryTalk View SE Servers or FactoryTalk View SE Clients is local. The RSLinx data server is installed on the same computer as the FactoryTalk View Se Server. Use RSLinx Classic when: You do not need to install an activation key to make RSLinx Classic work, provided you run RSLinx Classic on the same computer as the FactoryTalk View SE Server. Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Understanding RSLinx Software If the information is being served to third-party OPC client, for example, a FactoryTalk View SE Client. If the RSLinx data server is installed on a computer separate from the FactoryTalk View SE Server. You might do this for performance reasons, or to locate the OPC server physically close to the process generating data. You must use an RSLinx activation key for RSLinx Gateway: Copyright ? 2007 Rockwell Automation, Inc. All rights reserved. * Configuring Communications U