工程电磁场作业.docVIP

工程电磁场数值分析 专业： 姓名: 学号： 设计除尘器的电器部分，并用ANSYS软件优化分析电场和电位分布; 1.用ANSYS建立模型并分析结果如下 2.建立路径分析结果如下 3.原程序如下： /BATCH /COM,ANSYS RELEASE 10.0 U 16:26:50 01/05/2014 /input,menust,tmp,,,,,,,,,,,,,,,,,1 /GRA,POWER /GST,ON /PLO,INFO,3 /GRO,CURL,ON /CPLANE,1 /REPLOT,RESIZE WPSTYLE,,,,,,,,0 /REPLOT,RESIZE /FILNAME,chuchen,0 /TITLE,chuchen_E !* /NOPR /PMETH,OFF,1 KEYW,PR_SET,1 KEYW,PR_STRUC,0 KEYW,PR_THERM,0 KEYW,PR_FLUID,0 KEYW,PR_ELMAG,1 KEYW,MAGNOD,0 KEYW,MAGEDG,0 KEYW,MAGHFE,0 KEYW,MAGELC,1 KEYW,PR_MULTI,0 KEYW,PR_CFD,0 /GO !* /COM, /COM,Preferences for GUI filtering have been set to display: /COM, Electric !* /PREP7 !* ET,1,PLANE121 !* !* MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,PERX,1,,2 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,RSVX,1,,1e+16 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,RSVX,2,,1e-7 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,PERX,2,,1 RECTNG,-0.25,-0.26,-0.25,0.25, RECTNG,0.25,0.26,-0.25,0.25, RECTNG,-0.3,0.3,-0.25,0.25, FLST,2,3,5,ORDE,2 FITEM,2,1 FITEM,2,-3 AOVLAP,P51X FLST,5,3,5,ORDE,2 FITEM,5,4 FITEM,5,-6 CM,_Y,AREA ASEL, , , ,P51X CM,_Y1,AREA CMSEL,S,_Y !* CMSEL,S,_Y1 AATT, 1, , 1, 0, CMSEL,S,_Y CMDELE,_Y CMDELE,_Y1 !* FLST,5,2,5,ORDE,2 FITEM,5,1 FITEM,5,-2 CM,_Y,AREA ASEL, , , ,P51X CM,_Y1,AREA CMSEL,S,_Y !* CMSEL,S,_Y1 AATT, 2, , 1, 0, CMSEL,S,_Y CMDELE,_Y CMDELE,_Y1 !* SMRT,6 SMRT,1 MSHAPE,0,2D MSHKEY,0 !* FLST,5,5,5,ORDE,4 FITEM,5,1 FITEM,5,-2 FITEM,5,4 FITEM,5,-6 CM,_Y,AREA ASEL, , , ,P51X CM,_Y1,AREA CHKMSH,AREA CMSEL,S,_Y !* AMESH,_Y1 !* CMDELE,_Y CMDELE,_Y1 CMDELE,_Y2 !* ALLSEL,ALL FINISH /SOL !* ANTYPE,0 FLST,2,1,5,ORDE,1 FITEM,2,1 /GO !* DA,P51X,VOLT,0 FLST,2,1,5,ORDE,1 FITEM,2,2 /GO !* DA,P51X,VOLT,100 FLST,2,8,4,ORDE,3