利乐TCBP70-MT-83024-1.pdfVIP

Machine description Tetra Cardboard Packer 70 Multi-infeed GH200887 MT-83024-1 Technical Training Centre, Lund This textbook has been compiled by the Technical Training Centre in Lund. For further information on training material, contact the Technical Training Centre in Lund. Issue 1/9701 © 1997, Tetra Pak, Technical Training Centre No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means: electrostatic, magnetic tape, mechanical, photocopying, recording or otherwise, without permission in writing from Tetra Pak, Technical Training Centre. Tetra Cardboard Packer 70 Multi-infeed GH200887 Technical Training Centre Contents General description Feed 1 Basic unit 2 Feed Conveyor 2 Package brake 3 End stop 3 Photocells 3 Grouping pusher 3 Transport conveyor Photocells 4 End stop 5 Transfer pusher 5 Transfer plate 6 Main shaft Drive 7 Cams 7 Angle decoder 7 Magazine Feed 8 Pulling down tray blanks 8 Carrier chain Drive 9 Packing pattern 9 Stop position 1 10 Stop position 2 11 Stop position 3 12 Wraparound unit Flap folder 13 Main folding unit 13 Tetra Cardboard Packer 70 Multi-Infeed General Description Tetra Cardboard Packer 70 is used to pack Tetra Pak pack