医疗污染工程：干净室的施工质量操纵(国外英文资料).docVIP

医疗净化工程：洁净室的施工质量控制(国外英文资料) Medical purification project: the construction quality control of the clean room In the modern medical industry, as a special and huge industry, people are almost as demanding in their health care services. Hospitals must also be professional in implementing medical purification projects. The clean room is a more important place to be in the operating room. The quality control can be divided into three stages: the preparation stage, the construction stage and the acceptance stage. (1) the key points of quality control in preparation stage Carefully prepare the drawings and the technical background Fully understand design intent, and the blue prints.the design technical clarificaiton work is to guarantee the quality of the clean room construction important link, find and solve the difficult technical problems in the construction, in order to ensure the clean room construction quality to lay a solid foundation. There will be a variety of contradictions in the construction, which require the cooperation between the construction party and the design and construction, and make reasonable changes to ensure the quality of the clean room. Such as in a clean room reconstruction project inspection found that the original design of the duct size in body building floor height restricted within the condole top layer cannot construction and after construction of coordination with design personnel and the project owner in does not affect the premise of engineering quality, the duct size from square to the sector, both meet the requirement of air volume, and ensure the construction of the ceiling height requirements. Strictly control the quality of material equipment The material equipment of clean room mainly has various adornment material and air conditioning equipment material. The decoration materials shall be inspected and verified strictly in accordance with the requirements of state relevant engineering and technical standards, construction quality