厂区主排水系统泄洪能力计算(国外英文资料).docVIP

厂区主排水系统泄洪能力计算(国外英文资料) The discharge capacity of the drainage system in the factory is calculated Our factory currently has three main drainage pipes in the factory area which are in the east drainage ditch and the south drainage ditch. The main distribution is as follows; 1, the sewage treatment station is located in DN800 reinforced concrete precast main drain pipe Flow Q = 1 / n * omega R2/3 * I1/2 = 1/0.014 * 0.42 * 0.42 * 0.3142/3 * 0.0031/2 = 0.963 m 3 / s = 3466.8 meters per hour Factory district northwest edge cooling tower area, road rain drainage, circulating water pump room, network control building, water treatment and wind deflector between libraries, in 200 mw unit area production, living and main workshop of fixed end side south rain rain and desulfurization gravity to rainwater drainage pump, the pressure increase to the sewage treatment station of DN800 precast reinforced concrete pipe into the factory east hong ditch. The rainwater pump room sets up 3 WQ submersible sewage pumps with the maximum flow of 700m3 / h for each pump. The main workshop of 100MW unit is the main workshop of the main workshop of the area, the water and desulphurization area, the electric dust removal, the production of the fan, the life and the entry of the pipe. The main drain line of the main pipe of DN1200 reinforced concrete on the east side of the chlorine Drainage capacity (flow Q) = 1 / n * omega R2/3 * I1/2 = 1/0.014 * 0.14 * 0.32/3 * 0.0031/2 = 1.96 m/s = 7056 m3 / h North of factory production office building, office building, dormitory operation, chemistry, materials department chemical factory, 7, 8 # main transformer areas of production, living and rain water into the pipe through 48 ) reinforced concrete prefabricated piping east hong ditch into the factory. 3, 1 # coal field east side, coal control building south side DN800 reinforced concrete precast main drain pipe Drainage capacity (flow Q) = 1 / n * omega R2/3 * I1/2 = 1/0.014 * 0.42 * 0.42 * 0.3142/3 * 0