国际消防安全系统规则(FSS规则)的修正案(国外英文资料).docVIP

国际消防安全系统规则(FSS规则)的修正案(国外英文资料) An amendment to the international fire safety system rules (FSS) Chapter 5 - fixed gas extinguishing system The following text is replaced by the following text: 1 applicability This chapter specifies the specification of the fixed gas extinguishing system, which is required in chapter II and II of the convention. 2 project specification 2.1 the general 2.1.1 extinguishing agent 2.1.1.1 if you want the number of fire extinguishing agent to protect more than one location, by using the quantity of not more than the protection of the maximum number of any place needed. The system shall be equipped with the usual closed control valve, and it shall be furnished to the corresponding premises. 2.1.1.2 when calculating the amount of fire-extinguishing agent required, the amount of air receiver that is converted to free air quantity should be included in the total amount of the machine space. Alternatively, you can take a discharge pipe from the relief valve and direct it to the open air. The crew shall be equipped with a safety check to inspect the amount of fire extinguishing agent in the fire extinguishing container. 2.1.1.4 fire extinguishing agent storage pressure vessel, piping and related parts, consideration should be given to the location and use that may be encountered in the biggest environmental temperature according to the practical pressure rules to design with the consent of the competent authority. ( Installation requirements for 2.1.2 The arrangement of the pipe and the position of the nozzle should be able to evenly distribute the extinguishing agent. The flow of the system shall be calculated using the computational technology approved by the competent authority. 2.1.2.2 unless prior permission of the competent authority for the storage of extinguishing agent other than the steam pressure vessel, should be in accordance with article II of the convention - 2/10.4.3 at the outside of the protected space. The spare parts of the