数电实验——多功能数字钟(国外英文资料).doc

数电实验——多功能数字钟(国外英文资料) University of dalian university of science and technology research report Topic: multi-functional digital clock Course name: digital circuit course design College (department) : electronic information and electrical engineering department Specialty: automation Class: the electricity is 0801 Students name: Student: 200881142 Completion date: July 20, 2011 Achievements: July 20, 2011 Topic: multi-functional digital clock 1 the design requirements (1) a decimal digit with time, score, second, and second (hour from 00 to 23) timer. (2) the function of the school score in the manual school. (3) timing and alarm function can make a noise at the set time (4) the hour of the hour. The pitch is made from 59 minutes and 54 seconds, and the bass is emitted every two seconds, three times in a row, and a high pitch at the full point. Design analysis and system design System overall result System design requirements specification: (1) the stopwatch will be 24 hours per hour with the mode 24 and 60 counters (2) when adjusting the alarm clock without affecting the normal chart of the digital clock; (3) to display the alarm clock through a digital tube. System and module hardware circuit design According to the overall structure of the system, the design of the system hardware circuit is given, and the necessary instructions and theoretical calculation are given. As a result of digital circuit course design by experiment box is complete, no classes involved the use of FPGA chip, therefore, the part of the FPGA chip can be used instead of the minimum FPGA system module box. The rest of the interface (buttons, leds, and digital tubes, all kinds of interfaces, etc.). The development system pattern chosen for download and the pin definition Table 1 gw48-ck development system work pattern: pattern 0 interface The name of the type (input/output) On the chart The signal name Pin number instructions en The input PIO7 16 Manual school (1-adjustable, 0-walking table) th T