液压系统压力失常的原因及解决方法(国外英文资料).docVIP

液压系统压力失常的原因及解决方法(国外英文资料) The reason of the hydraulic system and the solution Working pressure is one of the most basic parameters of hydraulic system, and the normal function of working pressure will greatly affect the performance of hydraulic system. Hydraulic system work stress disorder is often characterized by the pressure to mediate a pressure regulating valve failure, the system pressure build up, completely without pressure and keep high pressure, the pressure rise and then fall down and unstable, and so on and so forth. Once appear stress disorder, the execution element of the hydraulic system will be difficult to perform normal work cycle, may appear in the original position does not work all the time, movement speed significantly reduced, activity related control valve group is often a cacophony of noise and so on, lead to machine in the abnormal state, affect the use of the whole machine performance. Causes of stress disorders One is the hydraulic pump, motor side. The hydraulic pump, the motor is used too long, the internal wear is serious, the leakage is large, the volume efficiency is low, the output flow of the hydraulic pump is not enough, the system pressure is low. Low engine speed, low power, low system flow and low hydraulic system. The position of the hydraulic pump directional control device is wrong or wrong, the pump is not working and the system is not stressed. Two is the reason of hydraulic control valve. In the course of work, if you find that the pressure is not going up or down, it is likely that the reverse valve fails, causing the system to continue unloaded or continuously high pressure. Overflow valve damping hole jam, have burrs on the main valve core, valve core and valve holes and gaps with dirt is likely to make the main valve core is stuck in the full open position, the hydraulic pump output of hydraulic oil through the overflow valve directly back to the fuel tank, oil pressure and oil back short sub, cause the system pressur