FLAC3D中出错警告.pdf

FLAC 3D Version 2.0 B - 1 B ERROR MESSAGES B.1 FLAC3D-Specific Errors *** A zone has undefined material model One or more zones in the model has not had a material model defined. This must be done before cycling. *** All zones have NULL fluid model No zones with active fluid material models are present. Either activate some zones for fluid calculations or disable fluid calculations. *** Attempted to create a degenerate triangle The generation a surface item caused the creation of a degenerate triangle (i.e. one with co-linear points). *** Bad command FLAC 3D failed to recognize the command entered. *** Bad format parameter i (string ) The ith parameter on the command line was not in the format required by the com- mand syntax. *** Bad I/O on file file FLAC 3D was unable to either read or write to file file . If writing, there may be no available disk space. If reading, the file may be corrupt. *** Bad keyword parameter i (string ) Parameter i on the command line was not processed by FLAC 3D. Check the command syntax. B - 2 FLAC 3D Version 2.0 *** Bad overlay code An illegal overlay code was specified in the MODEL command. Legal values are integers between -1 and 2. *** Bad RANGE keyword A range was specified with an illegal or unrecognized keyword. Check for spelling errors and see the manual for the correct syntax. *** Biot modulus fluid mode is off May not access Biot modulus when Biot modulus mode is off. *** Biot modulus fluid mode is on May not access fluid modul