DS18B20自编程序经过调试.pdfVIP

#includereg52.h //#includeshuju.h #defineuiunsignedint #defineucunsignedchar sbiten=P2^7; sbitrs=P2^6; sbitrw=P2^5; sbitDQ=P3^7; sbitbeep=P1^5; unsignedcharcodetable[]={temperture:}; voiddelay(ucz) //延时函数 { while(--z); } voiddelay1(uia) //大延时函数 { ucx,y; for(x=0;xa;x++) for(y=0;y200;y++); } voidFM() //蜂鸣器响函数 { beep=0; delay1(200); beep=1; delay1(200); } voidinit_ds18b20() //初始化DS18B20 { DQ=1; delay(1); DQ=0; delay(250); DQ=1; delay(100); } voidwrite_byte(ucdate) //写一个字节 DS18B20 { uci; for(i=0;i8;i++) { DQ=0; delay(6); DQ=(bit)(date0x01); delay(20); DQ=1; date=date1; } } ucread_byte() //读一个字节 DS18B20 { uci,temp; for(i=0;i8;i++) { DQ=0; temp=temp1; DQ=1; delay(1); if(DQ==1) temp=temp|0X80; delay(16); } returntemp; } uiget_temperture() //温度转换 { uca,b; floattt; uitemp; init_ds18b20(); write_byte(0xcc); write_byte(0x44); init_ds18b20(); write_byte(0xcc); write_byte(0xbe); a=read_byte(); b=read_byte(); temp=b; temp=temp8; temp=temp|a; tt=temp*0.0625; temp=tt*10+0.5; returntemp; } voidsend_ins(ucins) //液晶写指令 { rs=0; P0=ins; delay(230); en=1; delay(230); en=0; } voidsend_data(ucdate) //液晶写数据 { rs=1; P0=date; delay(230);