冷轧变形对Custom 465钢组织和性能的影响.pdfVIP

第 20 卷第 8 期 Vo l. 20. No.8 钢铁研究学报 2008 年 8 月 Journal of lron and Steel Research August 2008 冷轧变形对 Custom 465 钢组织和性能的影晌 陈嘉砚， 杨卓越， 张永权 (中国钢研科技集团公司结构材料研究所，北京 100081) 摘 要:研究了冷轧变形对 Ti 强化马氏体时效不锈钢 Custom 465 时效析出、逆转变奥氏体相变和力学性能的影 响。结果表明g ①在 510 C 时效过程中，杆状 NiaTi 金麟问化合物持续析出、妖大，致使快速发生硬化Fφ510 c 时效过程中，发生逆转变奥氏体相变，冷轧变形使逆转变奥氏体相变滞后，(l)析出 NisTi 金属间化合物的同时，马 氏体基体发生部分回复. 关键词:冷轧变形$逆转变奥氏体;力学性能F 马氏体时效不锈钢 中团分言能号:丁G142.7 文献标识码:A 文就编号: 1001-0963(2008)08-0031-07 Influence of Cold Deformation on Structure and Behavior of Custom 465 CHEN Jia-yan , YANG Zhuo-yue , ZHANG Yong-quan Onstitute of Structure Materials. Steel Research Technology Group Corporation of China. Beiji昭 100081 ， China) Abstracf; The inf1 uence of cold deformation on precipitation , reverted austenite and mechanical properties of Ti- strengthened maraging stainless steel Custom 465 after aging has been researched. The results show that; ( the intermetallic compound Ni Ti with the form of poles precipitates and grows up in the steel continuously. which re幽 3 sults in rapid hardening ， φduring aging at 510 C. reverted austenite appeared. Cold deformation restrained the reverse transformation; @ the recov. ery begins in the matrix of martensite , while the precipitation of Nis Ti is gOlng on. Key words:cold deformatiom ,reverted austenite;mechanical properties ,maraging stainless steel EM) X Ti 强化冯氏体时般不锈钢 Custom 465 的物理