中国矿业大学专业课程描述.doc

中国矿业大学专业课程描述 课程编号 050002S4 课程名称 机械动力学 课程性质 专业必修 课程学时 30 课程学分 2 适用专业 机械工程 考试方式 笔试 课程名称（英文） Mechanical Dynamics 课程描述（中文） 机械动力学是机械设计及理论和机械电子工程的专业的技术基础课。 该课程讲述和研讨的内容包括机械振动基础、机械系统响应的数值计算、工程实践中典型机械系统的动力学分析方法和非线性动力学简介四个主要方面，其内容主要包括机械振动中的单自由度、多自由度、弹性体振动系统的建模与分析过程，以此为例介绍机械系统振动的数值方法基本原理及其推演过程，最后对非线性振动基础，转子动力学理论和弹性连杆机构械系统的动力学分析理论作必阐述。目的在于加强学生对机械系统动力学分析方法和动态设计的过程及其计算分析方法的理解和认识，重点在于训练学生将复杂的工程实际问题抽象为可用于指导工程设计与应用的机械系统动力学模型的建立与分析的过程与方法。 撰写人签名： 年 月 日 课程描述（英文） Mechanical dynamics is the basic course of the subjects of the mechanical design and theory and the mechanical and electrical engineering. The content mainly discussed and studied in this course consists of four parts, i.e. the mechanical vibration introduction, the calculation of mechanical system response, the dynamic analysis methods of classic mechanical systems in engineering practice, and the brief introduction of the nonlinear dynamics theory. The modeling and analysis of the single degree system, the multi-degree system and the elastic system vibration are to be discussed respectively, which are to be cited as instances to introduce the calculation principle and the corresponding deduction. The nonlinear vibration basis, the rotor dynamics theory and the dynamic analysis theory of the elastic rob system are also to be introduced. The purpose of which is to promote the students to enhance the understanding of the mechanical system dynamic analysis methods, the dynamic design process and the corresponding calculation and analysis methods. The key is to teach the students to abstract the complex practical engineering cases to dynamic model that can provide guidance for engineering design and application, which includes the processes and methods of modeling and analysis. 撰写人签名： 年 月 日 参考书目： 刘初升等，机械动力学，中国矿业大学出版社，2012。 李德葆，工程振动实验分析，清华大学出版社，2004。 赵 玫，机械振动与噪声学，科学出版社，2004。 石端伟，机械动力学，中国电力出版社