基于单片机的数码相框的设计与仿真-毕业设计.doc

毕业设计(论文) 课 题 名 称 学 生 姓 名 学 号 系、年级专业 电气工程 指 导 教 师 职 称 2015年 月日 AT89C51单片机;LCD12864; Protues; Keil Abstract This design first elaborated the significance and the importance of digital photo frames in real life. And describes the applications of digital photo frame and potential applications. Simply describes the current level of domestic and foreign digital photo frame technology. Paper is to introduce the technical requirements for the paper, the design of the digital photo frame design of the program to select and demonstration, including the AT89C51 microcontroller, LCD12864 LCD of choice. Then we introduced the digital photo frame hardware circuit design, including overall system hardware design, MCU processing module, smallest single-chip system design LCD module and a power supply circuit and then introduced the software design of digital photo frame, including software design data structures and SPI transmission. Finally, the introduction of simulation debugging, including simulation map drawn by Protues, with Keil editing program, and the simulation results and analysis. Achieved through analysis and comparison of this design specification. Formal correctness of this design. Key words: AT89C5 SCM;LCD12864;Protues;Keil 目录 中文摘要……………………………………………………………...………. I 英文摘要……………………………………………………………………………..……II 1 绪论 1 1.1 选题背景 .....................................................................................................1 1.2 国内外研究现状..........................................................................................1 1.3 论文主要研究内容......................................................................................2 2系统方案设计................................................................................................... 2.1 单片机选型 2.2显示器的方案选择 3硬件电路设计 3 3.1 系统总体硬件设计...................