基于msp430g2553单片机ADC测量外部直流电压.docVIP

#includemsp430g2553.h #define uchar unsigned char #define uint unsigned int #define LCD_CON_DIR P2DIR #define LCD_CON_IN P2IN #define LCD_CON_OUT P2OUT #define LCD_RS BIT0 //p2.5接51 p2.5 #define LCD_RW BIT1 //p2.0接51 p2.6 #define LCD_EN BIT2 //p2.1接51 p2.7 #define LCD_DATA_DIR P1DIR #define LCD_DATA_IN P1IN #define LCD_DATA_OUT P1OUT #define A 1000 #define B 100 #define X 10 void InitOsc(void); void InitLCD(void); void write_command(uchar command); void write_data(uchar data); void Display_ZFC(uchar *s); void LCD_Set_xy(uchar x,uchar y); void Trans_val(uint