2Cre与atNw.ppt

Network Creation with LonMaker;Step 1: Physical Device assignment with Plug-in;Physical device assignment via Plug-in and the Device Wizard;Device assignment via Plug-in: loading of the configuration file;Device assignment via Plug-in: Channel selection;Device assignment with Plug-in: Optional Attributes;Device assignment without Plug-in: Import directory and XIF-file read the XIF-File with Nodeutil from the device. (if not available yet) copy the available XIF-File in the LonMakerdirectory: LonWorks\Import Recommendation:Create different directories for different manufacturersand devices Manufacturers should deliver the XIF-file in Version 4because they contain default values;Step 1: Physical device assignment with XIF-File (without Plug-in) Place the Shape devicein the network via?Drag and drop“ The Dialog ?New Device Wizard“appears(See next page) Note:Different devices canbe arranged on everychannel and assignedvia templates likeXIF-Files for instance.;Device assignment with XIF-files: The configuration file;Devices assignment with XIF-files: Optional attributes Optional entries Location String:Information about the stateof the the device in ASCII or Hex Ping Interval:Polling interval for the devicesurveillance. Important forthe DDE -Server application andXBS (1 Minute) Description:Long description for documentation purposes ?Finish“: The device finally appears;Device assignment with XIF-file: Option ?Upload from Device“ Service Pin:Identification of the device by pressing the Service Pin Manual:The Neuron ID must beentered manually Next;Device assignment with XIF-file: Option ?Upload from Device“ Load Application Image is used to load the application Note: For XL10 this information is available in the EPROMand therefore shall not be selected Next ;Device assignment with XIF-file: Option ?Upload from Device“ States Offline: Application is not running. A reset of the device startsthe application (Online mode) On