ANSY与S 热分析的可用单元.doc

?Available Elements for Thermal Analysis The ANSYS and ANSYS Professional programs include about 40 elements (described below) to help you perform steady-state thermal analyses. For detailed information about the elements, consult the Element Reference. That manual organizes element descriptions in numeric order, starting with element LINK1. Element names are shown in uppercase. All elements apply to both steady-state and transient thermal analyses. SOLID70 also can compensate for mass transport heat flow from a constant velocity field. Table?2.1??2-D Solid Elements Element Dimens. Shape or Characteristic DOFs PLANE35 2-D Triangle, 6-node Temperature (at each node) PLANE55 2-D Quadrilateral, 4-node Temperature (at each node) PLANE75 2-D Harmonic, 4-node Temperature (at each node) PLANE77 2-D Quadrilateral, 8-node Temperature (at each node) PLANE78 2-D Harmonic, 8-node Temperature (at each node) Table?2.2??3-D Solid Elements Element Dimens. Shape or Characteristic DOFs SOLID70 3-D Brick, 8-node Temperature (at each node) SOLID87 3-D Tetrahedron, 10-node Temperature (at each node) SOLID90 3-D Brick, 20-node Temperature (at each node) Table?2.3??Radiation Link Elements Element Dimens. Shape or Characteristic DOFs LINK31 2-D or 3-D Line, 2-node Temperature (at each node) Table?2.4??Conducting Bar Elements Element Dimens. Shape or Characteristic DOFs LINK32 2-D Line, 2-node Temperature (at each node) LINK33 3-D Line, 2-node Temperature (at each node) Table?2.5??Convection Link Elements Element Dimens. Shape or Characteristic DOFs LINK34 3-D Line, 2-node Temperature (at each node) Table?2.6??Shell Elements Element Dimens. Shape or Characteristic DOFs SHELL57 3-D Quadrilateral, 4-node Temperature (at each node) SHELL131 3-D Quadrilateral, 4-node Multiple temperatures (at each node) SHELL132 3-D Quadrilateral, 8-node Multiple temperatures (at each node) Table?2