胶印机匀墨系统运动及变形特性分析.pdfVIP

  • 7
  • 0
  • 约4.2万字
  • 约 7页
  • 2017-06-02 发布于北京
  • 举报

胶印机匀墨系统运动及变形特性分析.pdf

胶印机匀墨系统运动及变形特性分析.pdf

胶印机匀墨系统运动及变形特性分析一一初红艳 赵俊涛 严晓飞等 胶印机匀墨系统运动及变形特性分析 初红艳赵俊涛严晓飞蔡力钢 北京工业大学,北京,100124 摘要:为分析胶印机匀墨系统的运动和变形,利用 ANSYS 建立了匀墨系统中串墨棍和匀墨棍的模 型,分析了匀墨棍运动、变形、剪切应力、正应力的特点及影响因素。分析结果显示:匀墨辑运动主要受 串墨棍转速和串墨稳窜动量的影响;匀墨较正应力主要受其硬度的影响;匀墨辑剪切应力主要受其硬度 和两墨棍间摩擦因数的影响;匀墨辑变形主要受其硬度、串墨棍窜动量、串墨辍转逸的影响。 关键词:胶印机;匀墨系统;运动;变形;受力 中固分类号:TH123 DOI:IO. 3969/j. issn.1004-132X. 2014. 04. 020 Analysis of Motion and Deformation Characteristics of Ink Distributing System of Offset Printing Machine Chu Hongyan Zhao Juntao Yan Xiaofei Cai Lîgang Beijing University of Technology ,Beijing , 100124 Abstract: In order to analyze the movernent and deforrnation of an ink distributing system , a mod el of ink distributing roller and ink vibrator was built using ANSYS , the characteristics and influence factors of the movement , deformation , shearing stress and normal stress of the ink distributing roller were analyzed. The results show that , the movement of ink distrihuting roller is Înfluenced mainly by ink vibrators rotating speed and oscillating amplitude , the normal stress of ink distributing roller is influenced mainly by its hardness , the shearing stress is influenced mainly by its hardness and the fric tion coefficient between two rollers , and the deformation of ink distributing roller is influenced mainly by its hardness and oscillating amplitude and rotating speed of the ink vibrator. The results are very important for the study of printing color quality control. Key words: offset printing machine j ink distributing system; movement; deformation; stress o 31 言 设墨棍之间不存在相对滑动,分析结果与实际情 况相差太远[叫。王仪明等[5: 对高速胶印机图文 匀墨系统是印刷机的重要组成部分,它的作

文档评论(0)

1亿VIP精品文档

相关文档