远近光灯的自动切换.pptVIP

Auto Switching System for Vehicle Headlights Team members: YiQiu ,Dechao Yu ,HeheLi, Yuemin Han ,Xiaohong Liu. Probles statement: 1.When the drivers are driving they will inevitably come across other cars. When driving at night strong light glares into the drivers’eyes due to meeting each other halfway with the car lights on and the road reflection which may cause the drivers to see the road ahead unclearly. 2.In this case the drivers need to manually switch the type of the cars’headlights in time. But sometimes the drivers don’t have enough time to accomplish that action .which results in traffic accidents.For this we designed the Auto Switching System for Vehicle Headlights. Objective: First: automatic converter is a kind of used in the car when driving at night . Second: It can be automatically finished in the 50 to 100 metres high beam into a low beam lights. Third: Back after the meeting and can quickly return to high beam illumination of the automobile high beam, low beam lights automatically transform device. Fourth: Use of program control motor and reversing, to realize the shade different Angle! Realize the distance light switch and improve the driving safety at night. Materials: photosensive resistance arduino fixed resistance switch headlight Servo motor accumulator regulator Flow chart: circuit diagram: making making internal structure: external structure: Conclusion: Prons: automatic switch the type of the cars’ headlights in time. Reduce the frequency of traffic accident. Release the drivers’ fatigue sense. Enhance the reliability and increase safety. Cons: Servo motors response is not sensitive. Mend schemes: replace the performance better Servo motor or reduce the Servo motors rotation angle. Thank you! * * * * Auto Switching System for Vehicle Headlights team members Read light Sevor motor on start Val=512 low beam on high beam off yes no high beam on M 12V LI + 远 近 VCC GND 8 A0 accumulator photosensive resist