VijeoDesigner-简单项目(通讯,画面,模拟)(NXPowerLite).pptVIP

Module 7- * Vijeo Designer Technical Communications – North Andover Give your project a name (1) (will appear in menu tree) Add any comments desired (2) Type – Single target means a single XPTG Multiple Target – you can file multiple configurations under a single project name. Each target (XBTG) is configured independently. Project password may be added (discussed in Security section) Module 7- * Vijeo Designer Technical Communications – North Andover When you advance to this screen, you must name the target (1) and identify the model of the XBTG/GT/GK/GTW or iPC. The model simply sets the working area of the Graphic Editor and can be change later if needed. Module 7- * Vijeo Designer Technical Communications – North Andover If the interface to the Target (for program download) will be Ethernet, select the IP Address box and enter the IP information. Module 7- * Vijeo Designer Technical Communications – North Andover Module 7- * Vijeo Designer Technical Communications – North Andover Module 7- * Vijeo Designer Technical Communications – North Andover Selecting New Driver will add a communications driver to the current project. This driver is downloaded to the XBTG/GT when the project is downloaded. Multiple communication drivers are possible. Module 7- * Vijeo Designer Technical Communications – North Andover Non-Schneider drivers are also now available Module 7- * Vijeo Designer Technical Communications – North Andover Modbus Plus – requires Modbus Plus interface hardware Module 7- * Vijeo Designer Technical Communications – North Andover Module 7- * Vijeo Designer Technical Communications – North Andover Master panels are panel templates that can be applied to any base panel in your project. On a master panel, you can draw objects and place Toolchest parts, to create a panel of common objects that can be used for all base panels in a project. Master panels also store information about the common objects, such as font styles and ba