基于格子Boltzmann方法的可压缩翼型绕流模拟.pdfVIP

Sep.2009 Transactions of Nanjing University of Aeronautics . Astronautics Vo I. 26 No.3 COMPRESSIBLE FLOW SIMULATION AROUND AIRFOIL BASED ON LATTICE BOLTZMANN METHOD Zhong Chengwen , Li Kai 1 , Sun Jianhong Z , Zhuo Congshan1 , Xie Jianfei 1 (1. College of Aeronautics , Northwestern Polytechnical University , Xi an , 710072 , P. R. China , 2.College of Aerospace Engineering , NUAA , 29 Yudao Street , Nanjing , 210016 , P. R. China) Abstract , The f1 0w around airfoil NACA0012 enwrapped by the body-fitted grid is simulated by a coupled double- distribution-function (DDF) lattice Boltzmann method (LBM) for the compressible Navier-Stokes equations. Firstly , the method is tested by simulating the low Reynolds number f1 0w at Ma = O. 5 ， α=0.0， Re=5 000. Then the simulation of f1 0w around the airfoil is carried out at Ma = O. 5 , O. 邸. 1.2 ， α= 一0.05 ， 1.0 , 0.0 , respecti- vely. And a better result is obtained by using a local refined grid. It reduces the error produced by the grid at Ma=0.85. Though the inviscid boundary condition is used to avoid the problem of f1 0w transition to turbulence at high Reynolds numbers , the pressure distribution obtained by the simulation agrees well with that of the experimental results. Thus , it proves the reliability of the method and shows its potential for the compressible f1 0w simulation. The successful application to the f1 0w around airfoil lays a foundation of the numerical simul- ation of turbulence. Key words: compressible flow ,computatíonal fluíd dynamics 1 lattice Boltzmann method; airfoil; body-fítted gríd CLC number: V21 1. 1 Document code:A Article ID :100