一种小型化LTCC集总巴伦设计.pdf

Hans Journal of Wireless Communications 无线通信, 2016, 6(2), 46-51 Published Online April 2016 in Hans. /journal/hjwc /10.12677/hjwc.2016.62007 Design of a Miniaturized LTCC Lumped Balun * Xin Wang , Yongsheng Dai School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing Jiangsu th th th Received: Mar. 26 , 2016; accepted: Apr. 11 , 2016; published: Apr. 14 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract This paper presented a design and realization method of lumped balun based on the LTCC tech- nology, which was derived from simple LC balun and designed by ADS circuit simulation and the HFSS software to optimize the 3D modeling. The measured results agree with the simulated data basically, the center frequency of balun sample is 70 MHz, the bandwidth is 20 MHz, the insertion loss of the pass band is less than 4.7 dB, the phase difference between the two output ports is more than 172˚, the size is only 2.5 mm × 1.5 mm × 1 mm. The balun can totally be used in miniaturized mobile communication equipment. Keywords Low Temperature Co-Fired Ceramic, Lumped, Miniaturization, Balun 一种小型化LTCC集总巴伦设计 * 王 鑫 ，戴永胜 南京理工大学电子工程与光电技术学院，江苏 南京 收稿日期：2016年3月26 日；录用日期：2016年4月11 日；发布日期：2016年4月14 日 摘 要 本文提出了一种基于LTCC技术的集总巴伦的设计与实现方法。该小型化集总巴伦由简易LC 巴伦结构改进 *通讯作者。 文章引用: 王鑫, 戴永胜. 一种小型化LTCC 集总巴伦设计[J]. 无线通信, 2016, 6(2): 46-51. /10.12677/hjwc.2016.62007 王鑫，戴永胜 而成，利用ADS软件进行电路仿真以及HFSS软件三维建模设计。性能测试结果表明：测量结果数据与仿 真结果基本一致，该巴伦的标称中心频率为70